Thermalright Frozen Notte 360 Black ARGB V2 Water Cooling CPU Cooler, 360 Black CPU Cooler Specifications, 3×120mm PWM Fans

Excellent AIO at any price, but insanely cheap! in fact, the price was so low that I initially diregarded it, but then caught a Youtube review that sung it's praises, so I took the chance, and I'm glad I did. It installed super-easy into my AMD Ryzen 7800X3D build, looks great, and keeps my temps at 42-45 degrees at idle. Love the infinity mirror over the cooler. Have had my rig up and running for over 2 months now with no issues and everything running super-cool.

Dugger · 2025-12-16 · via amazon

The media could not be loaded. https://m.media-amazon.com/images/I/F1YnwiQjtpL.mp4 https://m.media-amazon.com/images/I/71hkHZL5fGL._SY256.jpg it does the job by cooling my ryzen 7800x3d, at full load CPU temps are below 75 degrees Celcius, the radiator fan and the pump are really quiet while gaming, and the rgb is nice, overall a great value for a 120mm AIO, works great looks nice and easy install.

Juan Jose Serrato Orduz · 2026-01-28 · via amazon

Keeps my i9-13900KF under stress at 83C (and idle at 35C). Previously, with a good air cooler, it reached 96C and 45C idle. So for the price this cooler is pretty great. Fans are quiet, and of course they can ramp up if needed. I cannot hear the pump at all. Installation was surprisingly easy. I don't care much about the LED, but it works perfectly with my ASUS motherboard.

Ottaviani Luigi · 2026-01-12 · via amazon

I have been using and testing this AIO since I received it shortly after Black Friday. Please note that my computer sits on a separate platform next to my computer, so it's about 2.5 feet away from my ears, and it's contained in a Corsair 5000x RGB. Intel 12700k CPU, Asus TG H670 Pro Wifi D4 mobo. I ran this in all 3 positions (top, side, front), with tubes up and down (front & side). Even during Cinebench, LinPack Extreme, Time Spy and Prime 95, the temperatures ranged no higher than 89C with ambient (room) temperature around 23C. It was always quiet although, after the few 3 months, I noticed an occasional harmonic resonance tone, which I assume was from the fans, and I little bit of noise from the pump. The best position for both the CPU and GPU in my case was on the side, exhausting the air, with the tubes going from the side of the block to the top of the radiator. Indeed, it was also one of the best positions overall, as it also did a good job keeping both the VRM heatsinks and motherboard cooler than 6 of the 10 positions I have tested so far. This is the first AIO I have tested, and you can watch my initial video about it on YT on my channel, The PC Expert Amateur. There will be at least one follow-up video with technical results once I complete the other 10 tests I need to do. Please note that WelshyTech (YouTube) deemed this and the Frozen Magic Scenic V2 to be loud, but he has his computer on his desk less than a foot from his head. He also noted that the MS V2 is slightly more powerful than the Notte. The mounting system is a bit awkward. At one point, I had to reorient the block and was unable to see (that's the bad thing about putting it on the floor) that I had missed putting two of the mounting screws through the bottom holes for the block, which resulted in bending them and slightly damaging the blue plastic stand-offs. Also, the knurled nuts are easy to turn by hand, and also have a large Philips cross for a screwdriver, but it is very easy to have them drop down to the bottom of the case. Aside from that, it's not bad, especially considering that you can mount the block in any orientation (I suggest top or right side). If you have a LONG graphics card and want to mount it on the front or side, you will likely have to vertically mount the GC (and if the case design is poor, as the 5000x's is, you will struggle to find a mount that won't choke the fans because it's too close to the left side panel) in order to do so. If you want to do a front mount with the tubes going to the bottom of the radiator (i.e. the radiator is positioned so that the tube apertures are at the bottom, not the top), it will probably be a tight fit, especially if you have a very long case, you may not be able to do it without modifying the tubes, so make sure that the block is mounted with the tubes on the side. Before finalizing the mounting of the block and rad, make sure to verify it will fit without putting too much pressure on the fittings on the block and rad. The block does have swiveling fittings for the tubes, so that does help, but it can still be a bit difficult.

Glal · 2024-04-06 · via amazon

Plan on getting better fans if you want argb. These are crap and each of them mirror each other so it's one signal copied across all three, I'd be surprised if they had 8 lights each. Idle and high cpu stress doesn't seem to bother it much, great pump and radiator so far. Great as a cooler, bad at being flashy and cool. Fit is great in most popular cases that can accommodate 360mm row, radiator is thinner than I expected and efficient. Paint quality is good too. Price is just right. But the fans won't impress anyone. Great for blackout or dark builds where it doesn't matter.

C. Jackson · 2025-11-19 · via amazon

Best Buy

Not tracked at this retailer

MSI

Not tracked at this retailer

Newegg

Not tracked at this retailer

Newegg (Open Box)

Not tracked at this retailer

VALUE SCORE

Price

$46.07