ID-COOLING IS-67-XT Black 67mm Height Low Profile CPU Cooler 6 Heatpipes CPU Air Cooler for HTPCs, ITX, and Small Form Factor Builds, 120x15mm Slim Fan, Support Intel LGA1700/1200/115X, AMD AM5/AM4

Great fit and style. Doesn't touch the ram cards and looks amazing. Does the job even in older systems. Cooling stays consistent and fan is silent. Mounted fine with instructions

Isaac · 2025-12-11 · via amazon

A fantastic small form factor cooler if you are space restricted. I'm using mine in the Fractal Terra and I've been loving it. The fan on the radiator can be a bit noise though, so I swapped it out for the Noctua NF-A12X15 and my temps have gone down dramatically. I'd recommend this cooler to anyone building a small form factor cause. An added benefit is the finstack can cover the top of low profile ram as well, allowing you to cool your ram and cpu at the same time. I really appreciate that as I'm in a very restricted case. Ultimately I higher recommend this cooler as it has great ram and vram clearance and is able to be used in so many different small form factor builds. It's definitely not going to be better than a cooler that is taller than it, but it is very comparable to competition from Noctua and Thermalright. The only thing id recommend to do is change the fan to a more quiet fan if you are concerned about noise. The actually cooler itself can be a bit of a pain to put on so the ease of installing does suffer a bit. Outside of that it is a really good cpu cooler and id recommend it to anyone building small form factor. Functions well and looks amazing.

Kindle Customer · 2025-06-29 · via amazon

aesthetics are unrivaled, easy installation and good thermals, perfect for many sff builds. also as a bonus, the fan its included with is really nice quality and feels sturdy.

Amazon Customer · 2026-05-06 · via amazon

This little cooler had proven QUITE effective in my use with a 7800X3D and 9800X3D. Both are on Xproto open-air frames, but the cooler easily handles both chips, keeping gaming temps 70C or below, and is nearly silent under any gaming load. The low-profile blends nicely into the Xproto design. The cooler comes with a multiple-direction mount for AMD so you can turn your cooling in the orientation to best suit your needs. Mounting it as I did the downdraft gives my VRMs a direct airflow and the orientation of the fins means the NVME drive gets solid air movement as well. If your board has too large of an I/O area cooler the various orientation options mean you can find an orientation that works for you with ANY motherboard.

E. Crisler · 2024-11-19 · via amazon

First, the size. This cooler is very compact and fit snugly in my ITX motherboard (ASRock B550M-ITX/ac). You are given the option to orient the portion that has a bulk of the heat pipes in one of two configurations, and I was able to install it with no conflict to either my RAM or VRM heatsink. Installing the cooler was not difficult, the tools they provide are enough and the instructions are straightforward but kinda IKEA-ish so if you are having difficulty installing it you can find a youtube video that walks you through it (I did). I'm planning a small form factor build and momentarily installed this cooler in my micro-ATX case (Cooler master 300L) where I currently I have a Ryzen 7 5800x. This CPUs tend to run hot as it is, and I can definitely hear the fan kick in under full load, yet this cooler keeps it at a toasty 70C allowing me to maintain high clocks. I will say that high air turbulence negatively affects cooling in many cases. I saw this in my case (pun intended) which contributed to the higher fan noise, but changing the placement of my intake and outflow fans helped with both the cooling and the fan noise. Always make sure to not significantly disturb the flow of air exiting the cooler so that it can cool the heatsink with cooler air rather than recycled warmer air. The fact that the fan pulls air from the heatsink rather than blowing it down helps keep motherboard components cooler. If you are thinking of installing this cooler on an AMD system you should be adjusting your PBO settings in order to optimize your cooling as it is. This is a great buy for anyone making a compact system, just plan ahead and consider your airflow. I look forward to putting this to use in my Cooler Master NR2000 case.

Jesus Contreras · 2024-11-04 · via amazon

Best Buy

Not tracked at this retailer

MSI

Not tracked at this retailer

Newegg

Not tracked at this retailer

Newegg (Open Box)

Not tracked at this retailer

VALUE SCORE

Price

$9.99

Price

$9.99